Differences

This shows you the differences between two versions of the page.

--- sleepy [2015/03/28 16:40] – andi
+++ sleepy [2015/04/24 12:26] – andi
@@ Line 6: / Line 6: @@
   * permissions ''sudo usermod -G i2c pi''
+===== Accelerometer =====
   * Klinke http://www.produktinfo.conrad.com/datenblaetter/700000-724999/718612-da-01-en-KLINKENBUCHSE_3_5_MM_4_POLIG.pdf
-    * (rot) Pol 4 (oberer Kontakt) -> (braun) VCC
-    * (schwarz) Pol 3 (hinten oben) -> (Litze) GND
+^ RasPI ^ Buchse ^ Sensor ^
-    * (orange) Pol 2 (hinten links) -> (grün) SCL
+| 3V (rot) | Pol 4 (oberer Kontakt) | (braun) VCC |
-    * (brown) Pol 1 (hinten rechts) -> (weiß) SDA
+| GND (schwarz) | Pol 3 (hinten oben) | (Litze) GND |
+| SCL (orange) | Pol 2 (hinten links) | (grün) SCL |
+| SDA (brown) | Pol 1 (hinten rechts) | (weiß) SDA |
+===== Temperature =====
+https://learn.adafruit.com/adafruits-raspberry-pi-lesson-11-ds18b20-temperature-sensing/hardware
+| Orange | 3V |
+| Yellow | GPIO #4 |
+| Green  | GND |
+===== Speaker =====
+GPIO 18
+right input and output
+mono files