sleepy
This is an old revision of the document!
Sleepy
- Connect ground to SD0 (see stackoverflow)
- Raspi ↔ GPIO connector, make sure ribbon cable connected right (silver up at Raspi, blue up at adapter)
- permissions
sudo usermod -G i2c pi
-
- (rot) Pol 4 (oberer Kontakt) → (braun) VCC
- (schwarz) Pol 3 (hinten oben) → (Litze) GND
- (orange) Pol 2 (hinten links) → (grün) SCL
- (brown) Pol 1 (hinten rechts) → (weiß) SDA
sleepy.1427560832.txt.gz · Last modified: by andi