notes.splitbrain.org

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Netgear MA401 on Linux======

{{wlan:netgear-front.jpg?250}} {{wlan:netgear-back.jpg?100}}

This is my old card called //802.11b Wireless PC Card//. It's an 16Bit PCMCIA card with the model name //MA401//. A small label on the backside calls it //Rev. D//.

Here is what ''cardctl ident'' says :

  product info: "NETGEAR MA401RA Wireless PC", "Card", "ISL37300P", "Eval-RevA"
  manfid: 0x000b, 0x7300
  function: 6 (network)hh

The card has a Prism 2.5 chipset which is well supported by various drivers including the Kernels ''orinoco_cs'' and the [[http://hostap.epitest.fi/|hostap]] driver. I used it with the latter one and upgraded the firmware following [[http://linux.junsun.net/intersil-prism/|Jun Sun's HOWTO]]. The card workes fine for some time but then suddenly freezes. Even ejecting and reinserting doesn't help. This occurs under Windows as well.

To get the cardmanager to recognize the card put this in your ''/etc/pcmcia/local.conf''. For the host_ap driver just replace ''orinoco_cs'' with ''hostap_cs''.

<file>
card "NETGEAR MA401RA Wireless PC"
  manfid 0x000b, 0x7300
  bind "orinoco_cs"
</file>

I was not able to get it running on Kernel 2.6.7. The orinoco_cs driver was unable to read it's MAC address and took the firmware version for 0.0.0 :-o. The hostap driver did compile but froze the whole machine on inserting the card.