sleepy
This is an old revision of the document!
Sleepy
- Connect ground to SD0 (see stackoverflow)
- Raspi ↔ GPIO connector, make sure ribbon cable connected right (silver up at Raspi, blue up at adapter)
- permissions
sudo usermod -G i2c pi
RasPI | Buchse | Sensor |
---|---|---|
3V (rot) | Pol 4 (oberer Kontakt) | (braun) VCC |
GND (schwarz) | Pol 3 (hinten oben) | (Litze) GND |
SCL (orange) | Pol 2 (hinten links) | (grün) SCL |
SDA (brown) | Pol 1 (hinten rechts) | (weiß) SDA |
sleepy.1429876217.txt.gz · Last modified: 2015/04/24 11:50 by andi